Frequently Asked Questions About BlackBerry phones

::.::RAMJAN::.::

Some Information About All BlackBerry phones


## How To Check firmware Version?
To check the firmware version of your Blackberry simply navigate it’s menu:-
Goto SETTINGS or OPTIONS then ABOUT
Images of firmware version




## How To Connect Phone With Pc.??
connect your phone to pc with data cable (same motorola v3 usb cable)


##To update the software on your Handheld or update the BlackBerry Desktop Manager software on your computer:

##BlackBerry Operating System Downloads
download link [Only registered and activated users can see links. ]


and dont forget to Delete the vendor.xml file located in c:\program files\common files\research in motion\apploader


##how to check Vendor ID (operator)??
Press group Key: ALT+Cap+H ->>>Vendor ID

##Images of Alt/Shift key




##how to reset blackberry password??
enter wrong code 10 times your phone will reset code after enter (blackberry) in case of code that's all


##How do I determine if my BlackBerry is "unlocked"?
To determine if your BlackBerry is "unlocked" for use on carriers other than for which it is branded:
Images of Locked Device
Images of Unlocked Device


##To obtain an unlock code for your BlackBerry:
You will need to know your IMEI number for your BB. Look at Options, Status. The IMEI may also be found on the white sticker under the battery (sometimes hard to read--make sure you read it right!). or need to know Vendor ID (operator)
You can purchase the unlock code from various vendors. These listed below are reputable vendors with good feedback from users.


1. [Only registered and activated users can see links. ]
2. [Only registered and activated users can see links. ]
3. [Only registered and activated users can see links. ]


##How to enter my Unlock Code on BlackBerry??


##how to solve Authorization Failure??
You are all set.
No more Authorization Failure sending / receiving calls and messages.


##how many way to unlock BlackBerry phones???
1. Use Service Tools or free tool(pst carcked for blackberry read code)
2. no key sim / u sim
3. unlock by imei



##which BlackBerry phones supported by Service Tools or free tool(pst carcked for blackberry read code)



##how to read unlock codes with pst carcked??

Instructions:
1. anti virus is disable
2. Make sure phone is upgraded to latest 4.x firmware
3. remove/disable password from the phone. If password is
forgotten
4. install BlackBerryLoggerDriverInstaller first before connecting your blackberry
5. then prass get codes , You will see the read codes.....



## free tool(pst carcked for blackberry read code) download [Only registered and activated users can see links. ]


## BlackBerryLoggerDriverInstaller download [Only registered and activated users can see links. ]


##How do I Recover a Dead BlackBerry ?


When your device fails to start, it show one of these symptoms

1. Totally dead
2. Trying to restart, LED activity only.
3. Failed to start, a white screen with an error message.
In many cases, the Application Loader can be used from Desktop Manager or Windows, If that fails to connect, there is one final solution.

A. In order to restore the device, you need to have BlackBerry Desktop Manager installed. The original, as supplied on the BlackBerry CD is adaquite. Tip: If you choose to download the newest v4xx, you can save a lot of time by choosing custom install and disabling Roxio Media Manager. At start-up, it really slows things down until it has built up it index of media.

B. After it is installed, you need to install a BlackBerry OS file that is specific to your device. The original version, as supplied by the carrier, is the safe choice, but you can use any model specific version. This is not supplied on your BlackBerry CD.

C. Once the OS has been installed, you have to prepare it for the device.
Delete the vendor.xml file located in c:\program files\common files\research in motion\apploader

D. You are now ready to restore your device. Verify that BlackBerry Desktop Manager is NOT running. Plug the device directly into the computer's USB port.


Windows XP: Start / Run... / Command

Windows Vista: Start / Command (type this into 'start search')

You will see a black window similar to this. I have used UPPERCASE to highlight the typed commands.

Windows Vista

Windows XP

When you hit enter at the last command a forced rebuild will start.

E. When it has finished, unplug it from the USB port and wait for it to finish start-up. Thirty minutes is typical, do not interrupt it.

Once it has recovered, you can use Desktop Manager's Application Loader to customize it and restore from your backup files, if you have saved them previously.



More Come Soon.....................
BEST REGARDS
::.::RAMJAN::.::@TRUST_GSM™