Phoenix Service Software 2010.08.004.41526 Cracked

veniamin

Phoenix Service Software 2010.08.004.41526 Cracked

This Phoenix Service Software installation package includes following SW
components:
- Phoenix Service Software 2010.8.4.41526
- DK2 Dongle Driver v 7.14.0.25
- Nokia Connectivity Cable USB Driver v 7.1.23.0
- Flash Update Package 09.050.025
- FLS-x Dongle Driver v 2.09.28

Changes/improvements made from previous version 2009.34.14.40684:
New products added:
- RM-601, RM-656, RM-657, RM-659, RM-559, RM-610, RM-618, RM-639,
RM-632, RM-633, RM-634
Products removed:
- RM-623

New features:
- Nokia Connectivity Cable USB Driver Version 7.1.23.0
- Flash Update Package 09.050.025
- Menu item WLAN Auto tune added for E72 product
- New RF Losses.ini v 47 for auto tune
- Product Code Change – window is now scalable, SW version information
for variants can now be seen if window is made larger.
Error corrections & changes:
- Support for FPS-8 and FPS-11 Flash Prommers removed
- Bluetooth Flasher – menu removed
- Flash Memory test removed
- Changes to WLAN UI to support new WLAN component versions
- Auto tuning components updated to new version
- Label printing changes to improve handling of older data package
configurations. If product has older data package configuration, the user is
advised to enable this option from the label printing UI
- Improvements to Data Package Download. When computer has active
internet connection, product code specific SW files are downloaded from
Firmware Repository. Please note that the path for downloading files
must also be configures to “Options / Product Location” - UI. If paths
are not the same, downloaded SW files are not found.
- Registration error for manual TX power level tuning component corrected.
- Minor menu Changes for RM-598 and RM-604
Known errors & limitations:
- Software downgrade with Tucson system is only possible for BB 5.0
products supporting the Data Package 2 concept.
- Flashing with Flashing with FLS-5, SS-46 and product specific adapter is
not supported anymore
- If you install old DCT-4 data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-4 data
packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when updating
FPS-x prommers, please check that Phoenix “Prommer maintenance” is
looking for the files from the correct location which is “C:\Program
Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error
“Update via ini – file failed”. In this case, select “Update” from that Phoenix
“Prommer maintenance” – UI, browse to correct directory and select
“fpsxupd.ini” for all other prommers except the FPS-8.
- Multi Flash has limited capabilities, launch Multiflash UI first and then
connect phones one by one, do not attempt to service more than 5
phones at the time
- Some phone models request SIM Lock data to be written in wrong format.
You should use special DLL as a workaround for this product software
related problem. Please see Common SB SB-102 “Tucson Add-On
Components for SIM Lock version”
- While performing restore or variant change operations with Tucson
system firmware update as a separate activity may increase stability.
- Refurbishment flashing and product code change for RX-51 product
requires SX-4 card to be available
- FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21
prommer with new HW version is needed to correct this, and it is
estimated to be available during 2nd half of 2010
- Please refer to product specific documents and instructions
concerning the limitations of the RX-51 product

snapshots:
















[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]