Phoenix Service Software 2010.48.4.44602 Cracked

1. CHANGE      HISTORY
 Version      1 20.12.2010 Initial version  2. INTRODUCTION
 New       version of Phoenix service software is available.  This  multi-protocol      service software supports Nokia CDMA, GSM, TDMA, and  WCDMA products.
 Main component      versions in the release:
 * DK2 Driver Version 07.14.0.25
 * Nokia Connectivity Cable USB Driver Version 7.1.34.0 
 * Flash Update Package 10.46.000
 * FLS-x Drivers Version 2.09.28
 * FUSE Connection Manager v 2010.44.0.584
 
 3. MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION      2010.38.5.44210
 New Products added     
 * RM-757, RM-746, RM-729, RM-738, RM-739, RM-724, RM-725, RM-607, RM-608,      RM-643, RM-644, RM-744, RM-745, RM-749
 New features
 * New Connectivity Cable driver
 * New version of FUSE connection Manager
 * New version of Flash Update Package
 * New versions of Product API
 * New PCCS library for Win 7 driver installation
 * New common data package ******** taken in use. All Nokia Service  Software      Applications will use following ******** for product  specific data:
 - Windows XP: C:********s and SettingsAll UsersApplication      DataNokiaPackages
 - Windows 7: C:Program DataNokiaPackages
 
 Error Corrections & changes
 * Changes to  GPS Control UI: Quick test - tab is now on top of the other      tests when menu is launched
 * Changes to Tucson components for phones with "USB Only" - service  concept      (RM-596, RM-675, RM-718 etc, which have no FBUS connection  available)
 * Some obsolete menu items removed
 * Improvements to keyboard shortcut functionality
 * Improvements to keyboard test
 * Changes to File Sysytem Format and Password Erasing for phones with      Symbian Operating System
 * Changes to Band Information writing
 * Improvements to Audio Control for RM-559
 * Torch test added to Camera Control UI
 
 Please note:
 * This version contains the latest Tucson components.  Therefore it is  not      necessary to use Tucson Add-On Installation Packages 
  * Before you start Phoenix or care Suite installation to Windows 7 the  User      Account Control (UAC) should be turned off from Windows  Control Panel      settings. 
 * For more information concerning new common data package ******** refer to      separate Service SW ********ation
 * For more information concerning new options in "Firmware Update" - menu,  Current options in Firmware Update UI:
 - Refurbish: Software will be updated with required  content files.  User      data will be deleted. It is mandatory to have the content  files installed on      PC, otherwise Refurbishment process will be  terminated. Before refurbishing,      ensure that you back up user data  with PC Suite.
 - Update Software: Updates software. User data will  be preserved. Optional      Content files are not required because they  are not programmed
 - Reset Software: Updates software and resets  settings to the factory      defaults. Some user data can be  lost.Optional Content files are not required      because they are not  programmed
 - Product Code changes for USB Only - phones (RX-51,  RM-596 etc) work only      when used with FPS-21 Flash Prommer and USB  connection from prommer rear      panel to phone. Please select USB as  Product Active Media
 - Do not use Flash option simultaneously with  product code change for USB      Onbly phones, flash phone separately  with Firmware Update
 - It is recommeneded to use FPS-21 flash  prommer with TCPIP connection when      refurbishing USB Only - phones  (RM-596 etc) due to mandatory optional MMC      file size.
 
 4. KNOWN ERRORS & LIMITATIONS
 * Software downgrade with Tucson system is only possible for BB 5.0      products supporting the Data Package 2 concept.
 * Flashing with setup FLS-5, SS-46 and product specific adapter is not      supported anymore
 * If you install old DCT-4 data packages, Flash Update Package File       installation path may be wrong. This is caused by very old DCT-4 data       packages which contain Flash Update Package and overwrite current       information during installation. If you experience problems when  updating      FPS-x prommers, please check that Phoenix “Prommer  maintenance” is looking      for the files from the correct ********  which is “C:Program FilesCommon      FilesNokiaTssFlash”. If not,  Phoenix will show error “Update via ini –      file failed”. In this  case, select “Update” from that Phoenix “Prommer      maintenance” – UI,  browse to correct directory and select “fpsxupd.ini” for      all other  prommers except the FPS-8. 
 * Refurbishment flashing and product code change for RX-51 product requires      SX-4 card to be available
 * RX-51 flashing does not work when CU-4 is used
 * RX-51 Product Code changes work only without FLASH option, please flash      phone separately
 * When version 2010_12_8_42304 or newer with FUSE connection manager is       installed on top of older Phoenix versions, there may be an  additional delay      of several minutes when you start Phoenix for the  first time. Please wait      patiently; Phoenix will start after  configuration is finished.
 * When using Data Package download  functions with online connection,      download times may occasionally  be long. This is not caused by Phoenix (or      Care Suite). The  download speed from online servers is occasionally known to      be  slow, depending on how data is buffered on caching servers.
 * Note concerning the installation and use with Administrator and User      rights
 - If you install Phoenix, start Phoenix and configure connections from  FUSE      connection manager as Administrator, you may not be able to  start Phoenix      after you log off and try to use Phoenix with User  Rights afterwards
 * If you experience the above mentioned problem: 
 - Log on as Administrator
 - Deleted Fuse folder and its contents from: C:********s and SettingsAll      UsersApplication DataNokia 
 - After this Fuse’s connection list will be empty and it can be used      directly with guest/admin rights. 
 - This has to be done only once.
 * After you close Phoenix, it may not restart. To rectify this, please  use      Windows Task Manager to manually shut down phoenix.exe and  FuseService.exe      processes, or optionally restart your PC
 * Mass memory content file flashing does not work for all products over USB      – FPS-10 or FPS-21 Flash Prommer must be used!
 * To be able to use the help files in Windows 7 you need to install  Windows      Help program (WinHlp32.exe) for Windows 7. Ways to locate  WinHlp32.exe:
 -  Start Phoenix with online connection to Internet,  select "Help" and      "Phoenix help". Click the "Microsoft Help and  Support" website link.      Download WinHlp32 and install it.
 - Go to    Microsoft Corporation.       Type "WinHlp32" to "Search Microsoft.com" - field. Locate  Windows  Help      program (WinHlp32.exe) for Windows 7 and install it
 
 * When  using flash prommers, only one connection type to one prommer is       allowed. Please use either NFPD USB or NFPD TCPIP connection to one  prommer,      not both connections to same prommer
  5. INSTALLATION 
 If you have Phoenix External 2007.4.6.170 or older you must uninstall it      before installing this release.
 1. Download      Phoenix_Service_Software_2010_48_4_44602.exe application file to your      computer (e.g. C:TEMP). 
 2. Close all other programs.
 3. Disconnect all flash prommers and phones which may be connected to  PC via      USB connection (reconnect them after Phoenix installation  has bene      completed)
 4. Run  Phoenix_Service_Software_2010_48_4_44602.exe and follow instructions       on the screen to install Phoenix Service Software
 5. Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the      screen
 6. If you are prompted to update any existing driver or file versions,      select “yes”.
 7. Depending on the operating system, the PC may require rebooting.
 8. Allow Windows to register the Phoenix components.
 9. Open Phoenix, use FUSE to configure connections depending on the tools      you use
 10. If you use CU-4, please pair the connection with service adapter by      selecting “pair with service adapter” - option
 11. Update your prommer with the latest software included in this      installation package.
 12. Install and use the latest available product specific data packages or      flash bundles
 Supported operating      systems and user rights
 * Windows XP Service Pack 1 or higher
 * When installing Phoenix into Win XP you must have local admin rights.
 * When using in Win XP, user must have power user rights.
 * Windows 7 32 Bit version
 
 For HW & Tool requirements please refer to Service Repair Processes      "Recommended hardware for PC"
 For information on product specific data packages, tools and instructions      please refer to service manuals and bulletins.
 If you are installing this version of Phoenix on a new Imaged PC, and  you      are using FLS-4S or FLS-5 during the install, then install the  FLS-X drivers      first. Latest version of the FLS-X drivers is  attached.