setool update

dunkin

just want to share the update of setool...



How to service db2010/db2020/pnx5230 cid52/cid53 using new setool2 (>=v0.914029) alternative bypass method ?
what problems i can meet and how to resolved them ?
what precautions should i follow ?



terms:
phone should work fine.
red blink, white blink, etc phones are NOT supported.

you can only use alternative bypass if your phone has supported firmware (you have BOTH rest file and bypass package)
if yours firmware not supported, either flash supported firmware (only main part in enough) or post request on forum.

BEFORE using new alternative bypass method you SHOULD turn phone on and install CSCA(MODEM) drivers.

i STRONGLY recommending to browse that FAQ and READ article about com-ports growth - there is EXTREMLY helpful file,which
prevents discovering of same phone models as new devices.

if you are capable user, you can edit .inf files of CSCA(MODEM) drivers - we only need to install
Sony Ericsson Device XXX bus driver and Sony Ericsson Device xxx USB WMC Modem - all other devices is not needed.
that will help you to save comport numbers.

important! if your phone had unsupported firmware and you flashed main part (all parts) of supported - you MUST power on phone, so phone will update new firmware info.

because of way new alternative bypass method works, you need
TEST SIM card (mcc/mnc 00101) or OPERATOR SIM card. (you must be able browse phone menu,etc)

supported following models:

db2012 cid52 - normal CID52 phones (w200,w300), abnormal CID52 phones (k310,k510,w810,z550)
db2020 cid52/cid53 phones
pnx5230 cid52/cid53 phones

supported operations:
unlock via patch, all additional things that setool2 can provide.

YOU AGAIN NEED REST FILES !!!! FOR ALL MODELS, WHICH ARE SUPPORTED FOR ALTBYPASS !!!
GET THEM FROM SUPPORT SITE OR DO IT YOURSELF

Procedure of new alternative security bypass :

1. select correct phone model
2. go to settings tab,
3. check BOTH "signed mode (using server)", "enable alternative security bypass", that is required
4. optionally, check "unlock after flash", "patch otp<>gdfs check in firmware"+"allow to change IMEI when unlocking" (read precautions)
5. optionally, check "complete phone after flash" (i recommend use custpacks)
6. go back to semc tab
7. if you need, add main+fsimage+custpack (******)
8. press desired operation
9. when asked, disconnect phone, insert TEST SIM, power on phone fully and connect it.
10. HOLD "C" (or "2" for w880/simular) BUTTON ALL THE TIME UNTIL PHONE REBOOTS.
11. when asked, disconnect phone, remove battery, insert battery, then connect phone while holding corresponding button ('C' or '2' for w880). In 99% cases phone will reboot and connects automatically.

approximate time for unlock by patch using new alternative bypass method is 160-180 seconds on one phone.

after unlock in phone will be application called "executor"
(menu->games->executor)
it is leftover from unlock procedure, you should delete it ... or....
if you run it - it will install preloader in phone and then you able to do any setool2 function without all that long steps...
(just check "use preloader security bypass)

precautions:
please take care that there is NO (at least, i can't get) cid52 firmwares for following db2010 phones: k310,k510,w810,z530,z550

luckily, k310,k510 can be flashed with w200 firmware, so we can always return them to original state.

but it is NOT related to w810,z530,z550 phones.
cause there is no firmwares, we can't recover them in case of error.

because of that, one mistake with that phones - and you get deadweight.
you have been warned.

under mistake i mean:
- terminated flash or anything,which prevents phone from starting up
- changed IMEI of phone, which prevents phone from using new alternative bypass method.

will repeat again:

DO NOT WRITE FOREIGN IMEI IF YOU NOT HAVE BACKUP IN DB2010 CID50/51/52/53 , DB2020 CID49/51/52/53, PNX5230 CID49/CID51/CID52/CID53 PHONE

THINK 10 TIMES BEFORE CHANGE IMEI IN W810/Z530/Z550 CID 52 PHONES
DO NOT EVEN THINK TO MESS UP FIRMWARE IN W810/Z530/Z550 CID52 PHONES

possible problems:

in case of terminated flash/etc you can always return phone to life by flashing any original firmwares into them -
and then it ready for execution again

short info of firmwares we have and have not:

db2012 k310 (via w200),k510 (via w200) ,w200,w300 - CID52 firmwares available.
db201x abnormal CID52 phones Z530,Z550,W810 - NO CID52 firmwares.
db2020 - supported CID52/CID53 firmwares available
pnx5230 - supported CID52/CID53 firmwares available

on "step 11" phone not connecting, but simple turning on

due delicate bypass process such thing is possible, but that happens VERY-VERY rare.
nothing weird happens in that case - you have 4 choices what do :

1. terminate process (press stop) and retry from beginning.
2. as phone powered on now, go to menu->games and run program called "executor". phone should "turn off",sometimes with white screen,sometimes not. Continue procedure then (step 11)
3. if you run "executor",but pressed stop - go to settings, check "enable preloader security bypass" - now you can do any operation with phone, like unlock/etc.
4. reflash phone in "signed mode" and start from step 1. (idiotic, isn't it ? )

on step 11 setool2 stucks in loop with message "PHONE NOT READY YET", but phone is turned on okay

well, better ask semc programmers why that happens... anyway - to solve that -
just press "STOP" ONCE - setool2 will continue procedure.

on step 11 i got message "CAN'T START EXECUTOR,RETRYING..."

it is okay to have that message if phone not in "normal mode" or starting up. just switch phone to normal mode and wait.


following firmwares are supported:


W880

R1JC002_CXC1250640_GENERIC_AI
R1KC001_CXC1250640_GENERIC_AI
R1KG001_CXC1250640_GENERIC_AI
R6BC002_CXC1250640_GENERIC_AI
R8BA024_CXC1250640_GENERIC_AI
R8BC004_CXC1250640_GENERIC_AI
R8BE001_CXC1250640_GENERIC_AI

Z310
R1JC002_CXC1250594_GENERIC_AL
R1KF001_CXC1250594_GENERIC_AL
R6BC002_CXC1250594_GENERIC_AL
R8BA024_CXC1250594_GENERIC_AL
R8BA024_CXC1250790_VODAFONE_AL

W710
R1EE001_CXC1250433_GENERIC_CH
R1GB001_CXC1250433_GENERIC_CH
R1JC002_CXC1250433_GENERIC_CH

Z710
R1EF001_CXC1250434_GENERIC_CN
R1JC002_CXC1250434_GENERIC_CN

K510
R4EA031_CXC1250231_GENERIC_CO
R4GC010_CXC1250231_GENERIC_CO

W850
R1ED001_CXC1250200_GENERIC_CY
R1GB001_CXC1250200_GENERIC_CY
R1JC002_CXC1250200_GENERIC_CY
R1JG001_CXC1250200_GENERIC_CY
R1KC001_CXC1250200_GENERIC_CY
R1KG001_CXC1250200_GENERIC_CY

K310
R4DA044_CXC1250466_GENERIC_DO
R4EA031_CXC1250466_GENERIC_DO
R4GC010_CXC1250466_GENERIC_DO
r4da044_CXC1250472_ORANGE_DO

W830
R1JC002_CXC1250705_GENERIC_EA
R1JC002_CXC1250713_CMCC_EA
R1KG001_CXC1250705_GENERIC_EA
R1KG001_CXC1250710_CHINA_EA

K790
R1CC003_CXC1250477_DEV_EV
R1EG001_CXC1250477_GENERIC_EV
R1GB001_CXC1250477_GENERIC_EV
R1JC002_CXC1250477_GENERIC_EV
R1JG001_CXC1250477_GENERIC_EV
R1KC001_CXC1250477_GENERIC_EV
R1KG001_CXC1250477_GENERIC_EV
R8BC004_CXC1250477_GENERIC_EV
R8BF003_CXC1250477_GENERIC_EV

W660
R6AD001_CXC1250446_GENERIC_FY
R6BC002_CXC1250446_GENERIC_FY
R8BB001_CXC1250446_GENERIC_FY
R8BE001_CXC1250446_GENERIC_FY

W810
R4CE012_CXC1250316_GENERIC_HN
R4CK003_CXC1250316_GENERIC_HN
R4EA031_CXC1250316_GENERIC_HN
R4GC010_CXC1250316_GENERIC_HN
r4db005_CXC1250316_GENERIC_HN

W300
R4EA031_CXC1123260_GENERIC_JE
R4GG001_CXC1123260_GENERIC_JE
R9A031_CXC1123260_GENERIC_JE
R9A035_CXC1123260_GENERIC_JE
R9A036_CXC1123260_GENERIC_JE

W350
R10BA015_1204-3117_GENERIC_JH

W580
R6BC002_CXC1123362_GENERIC_LA
R8BA024_CXC1123362_GENERIC_LA
R8BE001_CXC1123362_GENERIC_LA

W380
R10BA015_1201-4421_GENERIC_LE
R9BA023_1201-4421_GENERIC_LE
R9BB001_1201-4421_GENERIC_LE

K550
R1JD001_CXC1250669_GENERIC_LI
R1KC001_CXC1250669_GENERIC_LI
R1KG001_CXC1250669_GENERIC_LI
R6BC002_CXC1250669_GENERIC_LI
R8BA024_CXC1250669_GENERIC_LI

S500
R6AC003_CXC1123326_GENERIC_LY
R6BC002_CXC1123326_GENERIC_LY
R6BC002_CXC1123460_CHINA_LY
R8BA024_CXC1123326_GENERIC_LY
R8BE001_CXC1123326_GENERIC_LY

W200
R4GB001_CXC1250719_GENERIC_ME
R4GC012_CXC1250719_GENERIC_ME
R4GH001_CXC1250719_GENERIC_ME
R4HA014_CXC1250719_GENERIC_ME
R4JA011_CXC1250719_GENERIC_ME

Z555
R9BB001_1202-6764_GENERIC_MG
R10BA015_1202-6764_GENERIC_MG
R9BA023_1202-6764_GENERIC_MG

Z550
R6BA033_CXC1250583_GENERIC_ML
R6CA009_CXC1250583_GENERIC_ML
R6GA004_CXC1250583_GENERIC_ML

Z530
R6DA001_CXC1250454_GENERIC_MU
r6ac001_CXC1250454_GENERIC_MU
r6ba030_CXC1250454_GENERIC_MU

V630/K618
R1JC002_CXC1250556_VODAFONE_MW
R1JE001_CXC1250556_VODAFONE_MW

Z610
R1ED001_CXC1250546_GENERIC_MY
R1EJ001_CXC1250546_GENERIC_MY
R1GB001_CXC1250546_GENERIC_MY
R1JC002_CXC1250546_GENERIC_MY
R1JG001_CXC1250546_GENERIC_MY
R1KH001_CXC1250546_GENERIC_MY

W610
R1JD001_CXC1250747_GENERIC_NA
R1JE001_CXC1250747_GENERIC_NA
R1KC001_CXC1250747_GENERIC_NA
R1KG001_CXC1250747_GENERIC_NA
R6BC002_CXC1250747_GENERIC_NA
R8BA024_CXC1250747_GENERIC_NA

K530
R6BC002_CXC1250912_GENERIC_NC
R8BB001_CXC1250912_GENERIC_NC
R8BE001_CXC1250912_GENERIC_NC

K810
R1KC001_CXC1250811_GENERIC_SM
R1KG001_CXC1250811_GENERIC_SM
R6BC002_CXC1250811_GENERIC_SM
R8BA024_CXC1250811_GENERIC_SM
R8BE001_CXC1250811_GENERIC_SM
R8BF003_CXC1250811_GENERIC_SM

T650
R8BB001_1200-2562_GENERIC_SN
R8BC004_1200-2562_GENERIC_SN
R8BE001_1200-2562_GENERIC_SN

K610
R1ED001_CXC1250374_GENERIC_TH
R1GB001_CXC1250374_GENERIC_TH
R1JC002_CXC1250374_GENERIC_TH
R1JG001_CXC1250374_GENERIC_TH
R1KC001_CXC1250374_GENERIC_TH
R1KG001_CXC1250374_GENERIC_TH
R8BA024_CXC1250374_GENERIC_TH

K770
R8BA024_1201-7587_GENERIC_VI
R8BC004_1201-7587_GENERIC_VI
R8BE001_1201-7587_GENERIC_VI

K800
R1ED001_CXC1250210_GENERIC_WI
R1GB001_CXC1250214_CHINA_WI
R1JC002_CXC1250210_GENERIC_WI
R1JG001_CXC1250210_GENERIC_WI
R1KC001_CXC1250210_GENERIC_WI
R1KG001_CXC1250210_GENERIC_WI
R8BA024_CXC1250210_GENERIC_WI
R8BC004_CXC1250210_GENERIC_WI
R8BF003_CXC1250210_GENERIC_WI


link:
[Only registered and activated users can see links. ]